Have You Ever Wondered What The End Of Tape Measure’s Is Actually Used For? Well, Here You Go

Most Americans have used a common tape measure to assess dimensions. Whether you employ this convenient tool to measure fabric length during dressmaking, to estimate the cost of a new carpet, or to evaluate the height of a window or a door, the chances remain excellent that you appreciate accuracy whenever you seek to record measurements. Did you know that the hooked end of a tape measure possesses several useful features to assist people performing measuring tasks?

Most tape measures possess a tiny bent hook on one end. This component typically contains a very narrow slot within the curved portion of the metal. Why did the manufacturer design this measurement tool with this special feature?

A customer using the tape measure can perform highly accurate solo measurements as a result of the inclusion of the slot! By carefully positioning the edge of the tape measure hook over a nail head or a screw head fixed within a surface, anyone using a tape measure without assistance can effectively hold the tool in place more easily. Not having to secure the end of the tape measure using masking tape promotes far more accurate measurements, also.

Many tape measure hooks end in a rough, serrated edge. This feature also contributes to the utility of this handy tool. If you rub the serrated edge of the metal against a soft surface, such as drywall or a piece of wood, you can leave a small indentation to mark the precise end point of your measurement. If you forgot to bring along a pencil or a piece of chalk, this feature proves very useful.

The ability to clearly mark the beginning point of a manual measurement sometimes offers significant advantages. For instance, if you’ve taken measurements while following a set of instructions, and you subsequently wish to confirm that you measured in the desired locations, having a semi-permanent visible mark inscribed on the surface at a measurement point can prove quite useful.

Finally, for the convenience of people taking measurements with retractable tape measures, many of these tools record the precise length of the tape measure case itself on the exterior near the bottom of the device. Why would this information matter?

Although the benefit of knowing the precise length of the case at a glance might not seem obvious, anyone taking a measurement from a height can use the data to enhance accuracy. After hooking the end of the tape measure to a nail or a screw, simply extend the tool downwards and place the case in an upright position. Then add the length of the case to the extended length of the tape. You won’t need to distort the accuracy of your measurement by pressing the tape down at the bottom when you use a well-built retractable hooked tape measure. Additionally, if you’ve chosen to measure a distance that requires the full extension of the tape measure, having the ability to precisely measure the tape holder case length greatly increases the utility of this helpful tool!

Popular Articles